Products
Resources
Customer Service
Altra Industrial Motion - Brasil +55 (11) 4615-6300
The Twiflex MR series of disc brake calipers is suitable for use with discs of 12.7mm or 25.4mm thick. Minimum disc diameter is 250mm. Minimum disc diameter for the MR2 is 460mm.
Normally one or two calipers are used per disc, but the number may be increased depending on disc size. The brakes may be positioned at any angle around the periphery of the disc, but should ideally be mounted horizontally (i.e. at the 3 o’clock or 9 o’clock position). If the caliper mounting angle is greater than 10° from the horizontal, or on vertical shaft applications, it should be fitted with an equalising link. A range of brake discs is available from Twiflex (see Disc and Hub Assemblies).
For pneumatic operation use dry, filtered and non-lubricated compressed air. Pneumatic brakes require a control valve, operated either manually or by pneumatic or electrical signal.
The ratings shown on the graphs are based on fully bedded in and conditioned brake pads with a nominal friction coefficient μ = 0.4. Twiflex disc brakes must be used with Twiflex asbestos free brake pads.
Effective disc radius = actual radius (m) – 0.03m.
Altra Industrial Motion Brasil Avenida João Paulo Ablas, 2970 Jardim da Glória, Cotia - SP, 06711-250 - Brazil Phone: +55 (11) 4615-6300 CONTACT
Twiflex 9 Briar Road, Twickenham Middlesex TW2 6RB – England Phone: +44 (0) 20 8894 1161Fax: +44 (0) 20 8755 5601Email: [email protected] www.twiflex.com
2025 © Regal Rexnord. ALL Rights Reserved. Literature | Terms and Conditions | SiteMap | Legal, Privacy Policy | Terms & Conditions